Pureit brings to you a practical water purifier with a large storage capacity to
make sure you and your family always drink pure water, without any hassle.
A water purifier that doesn’t run on electricity or expensive gas
to purify water. It doesn’t even require continuous water supply.
Gives you an advance warning before the Germkill Kit™
needs to be changed.
Removes 1 crore virus in 1 litre of water
purification process through Programmed Germkill Technology
Removes harmful pesticides to make water safe for consumption
Tested up to 50,000 times to ensure that it lasts long
Made of strong plastic to ensure the purifier has a long life
Guarantees peace of mind for the customer, post purchase
The Germkill Kit has been designed to typically give 1500 liters of water at a temperature of 25°C, in moderate humidity conditions
Food safe, non-toxic, engineering-grade plastics
Two years from the date of manufacturing
Meets stringent international criteria for microbiologically safe drinking water – e.g., Environmental Protection Agency (EPA), USA
METHOD OF WATER
CONSUMPTION Cost per month
|Pureit৳ 0||Cooking Gas৳ 270||20 Ltrs Bottled Water Can৳ 1800||1 Ltr Bottled Water৳ 9000|
|Savings with Pureit v/s other purification methods||৳ 270||৳ 1800||৳ 9000|
Take a look at how this water purifier ensures purity of drinking water
with its 4 stages of purification that eliminates dirt and germs.
Pureit Classic can store 9 ltrs. of purified water at a time, but the total volume of the Pureit classic device is 23 ltrs
Every time you fill the top chamber of a 'Pureit Classic' water purifier with water, all of it will get purified, and will collect in the transparent chamber within a few hours. So you can keep filling the top chamber as often as you need. However, you must ensure that there is one inch of empty space left in the transparent chamber, and that you don't then pour any more water into the top chamber. If you don't do this, or if you forget to withdraw water from the transparent chamber, the system has been designed to overflow from the side. You may repeat as many cycles a day as you require.
The average flow-rate of the Pureit water purifier will depend upon the quality of the water that is put into the Pureit system, and may also vary with the life of the Pureit Germkill Processor. The flow-rate through the system will typically be in the region of 30-150 ml/min. This means that 9 litres of water would get purified in 1-5 hours, depending on the quality of input water. Please note that the flow rate will be much higher than that in the beginning of the Pureit Germkill Kit™ life. Whenever you feel that the flow from your Pureit water purification system has become unsatisfactorily low, you can wash Activated Carbon Filter. Cleaning will remove accumulated dirt on the Activated Carbon Filter and will improve the water flow. Please follow Activated Carbon Filter cleaning instructions mentioned in Troubleshooting. It must be remembered that the first time you use the system, and anytime else when you empty the Cleansing - Collection chamber (such as after prolonged nonuse) no water will come out into the transparent section for a few hours. This is because the Cleansing - Collection chamber has to get re-filled with water.
Input water may contain many materials which affect the taste of water. Of these, Pureit removes materials like oil, sand, soil, clay, dirt, decayed animal and plant waste, and harmful pesticide impurities and is therefore likely to improve the taste of water. However, Pureit does not remove some dissolved salts that may contribute to taste like sodium chloride salt, calcium and magnesium. In fact, Pureit retains some ‘good’ dissolved salts present in drinking water. This may affect the taste of water.