Pureit brings you a water purifier with an amazing feature like TDS removal that makes sure you drink safe and sweet drinking water.
Advanced 6-stage purification through RO + UV technology.
It turns hard water up to 1800 PPM into soft and sweet water.
Ensures that it fits perfectly in your kitchen
Advanced 6 stage purification through RO technology
RO Protection lock ensures safe water
Turns hard water upto 1800 ppm into soft and sweet water
Convenient 4 Litres water storage
Tested upto 50,000 times to ensure that it lasts long
Both of the GKK 1 & 2 must be changed after every 3000 L of purified water consumption or 1 year whichever is earlier – in a sequential manner
Food safe, non-toxic, engineering-grade plastics
Meets stringent international criteria for microbiologically safe drinking water – e.g., Environmental Protection Agency (EPA), USA
Here is how your Pureit Classic RO + UV purifies your drinking water with advanced technology.
Pureit Ultima 418 has a 6-stage purification system which ensures you get water that is ‘Safer than boiled” and also removes excess total dissolved solids (TDS) to make your water tastier. In the first stage, the water passes through the Pre-Sediment Filter which removes fine and coarse particulate impurities/dirt. The second stage is the Pre-RO Carbon Filter that removes chlorine and organic impurities like harmful pesticides. It also adsorbs bad taste and odor-causing organic compounds from water. The third stage is the Post-Carbon Sediment Filter which removes the remaining dirt. Then the water passes through the RO Membrane at high pressure, with the help of an inbuilt pump. The RO removes dissolved salts, hardness, pesticides and heavy metals like arsenic, lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and parasites. The fifth stage is the Micro Filtration (MF) Membrane which acts as an additional assurance of safety towards microbial contaminants. The last stage is the Post-RO Carbon Filter, which removes bad odor and enhances the taste of purified water.
Pureit Ultima 418 has a storage tank capacity of 4 Litres. The process of filling the storage tank is fully automatic and when you remove water, the purification process automatically starts and refills the storage tank, provided power is on.
‘Pureit Ultima 418’ can purify upto 9–12 Litres of water per hour. However, the time taken to purify depends on the life of the filters, the input water pressure, TDS and other impurities present in water.
Pureit’s Advance Alert System™ warns you approximately 15 days before the end of life of GKKs thereby assuring you safe water and maximum convenience. It has 2 indicators:
*Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure and life of Filter elements
**Provided total hardness is 600 ppm max
***Input water quality and TDS content are important determinants of output water quality.
****If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost. If the pressure is lesser than 5 PSI then you need to buy 'Pressure enhancing pump at an additional cost. Device should not be installed in a house where input pressure is greater than 60 psi.
#Technical specifications are subject to change or improvement without prior notice
## In case the TDS is > 1000 ppm, a company provided anti-scalant is recommended to be installed, this has to be purchased at extra cost.
###If the iron content in the input water is more, it is recommended to install a company provided iron filter.