FB
Product FAQs

A purifier for every requirement

  • How does Pureit Classic G2 Mineral RO + MF^ purify water?

    Pureit Classic G2 Mineral RO + MF^ has a 6-stage purification process which ensures you to get water that is ‘As Safe As Boiled Water’ and also removes excess Total Dissolved Solids (TDS) to make your water tastier.

    Stage 1st: Pre-Sediment Filter: Removes fine and coarse particulate impurities/dirt and improves the life of the Carbon Filter.

    Stage 2nd: Pre-RO Carbon Filter: Removes chlorine and organic impurities like harmful pesticides. It also absorbs bad taste odour causing organic compounds from water.

    Stage 3rd: Mini Filter: Filters water further to ensure removal of finer particulate impurities.

    Stage 4th: RO Membrane: Removes dissolved salts, hardness, pesticides, fluoride and heavy metals like arsenic, lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts. Stage 5th: Micro Filtration Membrane MF^: Micro Filtration Membrane MF is added Post-RO, which ensures that the water is purified not once but twice. Stage 6th: Last level of purification acts as a polisher and enhances the taste of purified water.

  • What is the storage capacity of Pureit Classic G2 Mineral RO + MF^?

    Pureit can purify water upto 20 litres/hour depending on the device you have purchased. However, the time taken to purify depends on the life of the filters, the input water pressure, TDS and other impurities present in the water.

  • How much time does it take to purify water in Pureit Classic G2 Mineral RO + MF^?

    Pureit can purify water upto 20 litres/hour depending on the device you have purchased. However, the time taken to purify depends on the life of the filters, the input water pressure, TDS and other impurities present in the water.

  • Does Pureit Classic G2 Mineral RO + MF^ remove arsenic, fluoride and nitrates?

    Like other ions, the RO technology can also remove arsenic, fluoride and nitrates.

  • How will I get new consumables/membranes replaced?

    You need to call the Pureit Helpline and order the consumables. The customer care specialist will visit your place and replace the consumable/Germkill Kit at a nominal cost.

  • What are all the consumables which are to be replaced?

    You need to clean/replace Sediment Filter approximately every 6 months from the date of installation based on the input water quality conditions and GKK approximately every 1 year from date of installation.

  • Can I drink the first purification cycle of water from the purifier?

    No, recommendation is to throw the first cycle of water that is filled in the Storage Tank when the new Pureit purifier is installed and also whenever the Germkill Kit are replaced.

  • Can I open and service my purifier?

    It is not recommended to open and service purifier by an individual. Call our Pureit Helpline if you face any issue which requires servicing and opening of the purifier.

  • Can I use reject water?

    It is not recommended to use the reject water for any kind of human/pets consumption (drinking or cooking). It may be used for gardening or cleaning floors.

  • What should I do if any part of purifier is broken?

    Please call the Pureit Helpline. Our technicians will visit your house and guide you on the repairs required. There will be a nominal visiting charge and you would need to buy the parts required.

  • What should I do if there is leakage from the purifier?

    First switch o the Ball Valve if you find any leakage from the purifier and turn o the power switch. Check for any visual improper fitment and then call our Pureit Helpline number and register a service request.

  • How long the stored water in Pureit Classic G2 can be used for drinking?

    You can use stored water for 2 days. If it is not used for more than 2 days we advise you to discard that water, refill and then consume.

Book a Home Visitx