Every drop of water you drink is sweet and always safe.
Prevents harmful toxins from leaching into water.
100% guarantee of safe and sweet water.
Device goes on stand-by once the tank is full, saving power.
You will never run out of purified water.
Enriches water by adding essential minerals like Calcium and Magnesium.
All water passes through RO ensuring no mixing of purified and impure water. Only RO can remove harmful chemicals like Lead, Mercury, etc.
Food safe, non-toxic, engineering-grade plastics
Meets stringent international criteria for microbiologically safe drinking water – e.g., Environmental Protection Agency (EPA), USA
Pureit Advanced Max Mineral RO+UV+MF+MP has a 7-stage purification process which ensures you to get water that is ‘As Safe As Boiled Water’ and also removes excess Total Dissolved Solids (TDS) to make your water tastier.
Pre-Sediment Filter: Removes visible dirt and impurities.
Membrane Protector: Removes chlorine, harmful pesticides, bad taste and odour-causing organic compounds, increasing the life of the RO membrane.
Stage 3rd:Mini Filter: Filters water further to ensure removal of finer particulate impurities.
RO Membrane: Removes dissolved salts, hardness, pesticides and heavy metals like arsenic, lead and mercury, microbial contaminants like bacteria, virus, protozoa and cysts.
UV Chamber: Additional stage of purication that destroys bacteria, virus and parasites.
Micro Filtration (MF) Membrane^: Additional stage of purification to further purify water.
Post RO Carbon Filter: Acts as a polisher and enhances the taste of purified water.
Pureit has Storage Tank capacity of upto 6L. The storage tank is fully automatic and well shielded and as and when you take water out of the tank, the purification process starts automatically again and refills the Storage Tank.
Pureit can purify water upto 20 litres/hour depending on the device you have purchased. However, the time taken to purify depends on the life of the filters, the input water pressure, TDS and other impurities present in the water.
Like other ions, the RO technology can also remove arsenic, fluoride and nitrates.
* Under test condition Input TDS – 750 PPM, Turbidity <1 NTU, Input pressure – 10 psi, Input Hardness – Upto 300 ppm, Temp. – Room temp.
*Savings when compared to other premium Pureit ROs, assuming a household consumption of 10L per day.
*** For all water contact parts.
5 Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure and life of Filter elements.
6 Input water quality and TDS content are important determinants of output water quality.
7 If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost.
If the pressure is less than 10 PSI then you need to buy ‘Pressure enhancing pump’ at an additional cost.
Device should not be installed in a house where input pressure is greater than 60 PSI.
Post-RO Carbon Filter fitted in the device may need to be changed intermittently at extra cost in case you face smell issues.
Technical specifications are subject to change or improvement without prior notice.
8 In case the TDS is >1000 PPM, a company provided anti-scalant is recommended to be installed. This has to be purchased at extra cost.
9 If the iron content in the input water is high, it is recommended to install a company provided iron removal filter at an additional cost.