*MRP (inclusive of all taxes) for 1 unit.
Every drop of water you drink is sweet and always safe.
Prevents harmful toxins from leaching into water, unlike non-food grade plastics.
Meets the toughest safety standards of Environmental Protection Agency, EPA (USA) by removing 1 Cr virus and 10 Cr bacteria from 1L water.
Water purifier goes on stand-by once the tank is full, saving power.
All water passes through RO ensuring no mixing of purified and impure water.
Water purified through 6 stages including RO+UV+MP.
Turns hard water up to 2000 ppm into safe and sweet water.
Large water storage so that you don’t run out of pure water.
Meets the toughest safety standards of Environmental Protection Agency, EPA (USA) by removing 1 Cr virus and 10 Cr bacteria from 1L water.
Prevents harmful toxins from leaching into water, unlike non-food grade plastics.
*MRP (inclusive of all taxes) for 1 unit.
6.8 kg
Upto 10-12 LPH
Pre-Sediment Filter, Pre-RO Carbon Filter, Mini Filter, Reverse Osmosis Membrane, UV Chamber and Post-RO Carbon Filter
Thin film composite spiral wound
Diaphragm pump, 24V DC
Typically 25%
90% (Min)
36 Watts
10-30 PSI4
100-300 V a.c., 50 Hz
Food safe, non-toxic plastics
1.5 metres
Upto 2000 mg/lit5
500 mg/lit (max.)
0.3 mg/lit (max.)9
1 NTU (max.)
Upto 10-12 LPH
Typically 25%
90% (Min)
Thin film composite spiral wound
6.8 kg
Diaphragm pump, 24V DC
1 NTU (max.)
10-30 PSI4
100-300 V a.c., 50 Hz
0.3 mg/lit (max.)9
36 Watts
1.5 metres
Food safe, non-toxic plastics
Upto 2000 mg/lit5
500 mg/lit (max.)
Pre-Sediment Filter, Pre-RO Carbon Filter, Mini Filter, Reverse Osmosis Membrane, UV Chamber and Post-RO Carbon Filter
Meets stringent international criteria for microbiologically safe drinking water - e.g. Environmental Protection Agency (EPA), USA.
Food safe, non-toxic plastics.
Pre-Sediment Filter - 1 No.
Pre-RO Carbon Filter - 1 No.
Post-RO Carbon Filter - 1 No.
Mini Filter - 1 No.
RO Membrane - 1 No.
1 4.8 ~ 5.2 under running water conditions.
***Applicable for all water contact parts.
2 Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure and life of Filter elements.
3 Input water quality and TDS content are important determinants of output water quality.
4 If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost.
If the pressure is less than 10 PSI then you need to buy ‘Pressure enhancing pump’ at an additional cost.
Device should not be installed in a house where input pressure is greater than 60 PSI.
Post-RO Carbon Filter fitted in the device may need to be changed intermittently at extra cost in case you face smell issues.
Technical specifications are subject to change or improvement without prior notice.
5 In case the TDS is >1000 PPM, a company provided anti-scalant is recommended to be installed. This has to be purchased at extra cost.
Download PDF
Pureit Advanced Plus RO+UV+MP has a 6-stage purification process which ensures you to get water that is ‘As Safe As Boiled Water’ and also removes excess Total Dissolved Solids (TDS) to make your water tastier.
Stage 1st
Pre-Sediment Filter: Removes fine and coarse particulate impurities/dirt and improves the life of the carbon filter.
Stage 2nd:
Pre-RO Carbon Filter: Removes chlorine and organic impurities like harmful pesticides. It also absorbs bad taste odour causing organic compounds from water.
Stage 3rd:
Mini Filter:Filters water further to ensure removal of finer particulate impurities.
Stage 4th:
RO Membrane: Removes dissolved salts, hardness, pesticides, fluoride and heavy metals like arsenic, lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts.
Stage 5th:
UV Chamber: Acts as an additional stage of purification to further inactivate bacteria, virus and parasites to deliver safe water.
Stage 6th:
Post RO Carbon Filter: Last level of purification acts as a polisher and enhances the taste of purified water.
Pureit has Storage Tank capacity of upto 7 litres. The storage tank is fully automatic and well shielded and as and when you take water out of the tank, the purification process starts automatically again and refills the storage tank.
Pureit can purify water up to 10-12 litres per hour depending on the device you have purchased. However, the time taken to purify depends on the life of the filters, the input water pressure, TDS and other impurities present in the water.
Like other ions, the RO technology can also remove arsenic, fluoride and nitrates.
METHOD OF WATER CONSUMPTION
Cost per month
| 
Pureit | 
Cooking Gas |
 Savings with Pureit v/s other purification methods | 0 | |
20 Ltrs Bottled Water Can
1 Ltr Bottled Water