For best performance make sure you place your device away from sunlight, kitchen appliances and in a well-ventilated room. For ease of use it is also convenient to place it near the kitchen sink.
Both the top Chamber and the transparent chamber have a capacity of 9 litres each, therefore in most families, one needs to fill water in Pureit only once a day
The technology in the device is such that when (and very rarely) the carbon polisher gets choked in the purifier, the water does not pass into the bottom chamber and the system inside cuts off any further water flow from the top chamber to the Cleansing collection chamber, preventing any overflow from the device.
No water is wasted during the purification process.
All Pureit components are made from high quality, durable food-grade plastic designed to last many years
Ideally once to twice a week, as per the User Manual instructions, to ensure longevity of the sediment filter’s life.
Carbon polisher can be washed whenever you take up the cleaning or when you see no water coming into the bottom chamber.
Ideally never. But even after your cleaning interventions you do not get water into the bottom chamber then you need to backwash the MC membrane.
- If there are a large amount of organic impurities in water, will it affect the life of Carbon Polisher?
No, large amount of organic impurities in water will not affect the life of Carbon polisher
Yes, below pump is required for cleaning the Carbon Polisher.
No, this device does not remove TDS from water.
Pureit Excella / Intella are gravity based devices and thereby do not remove dissolved salts in the water. The TDS level thereby remains unchanged; hence you should look for a RO device to purify this water.