FB page view
Product FAQs

A purifier for every requirement

  • How does Pureit Advanced Pro Mineral RO+UV purify water?

    Pureit Advanced Pro Mineral RO+UV has a 6-stage purification process which ensures you to get water that is ‘As Safe As Boiled Water’ and also removes excess Total Dissolved Solids (TDS) to make your water tastier.

    Stage 1st
    Pre-Sediment Filter: Removes fine and coarse particulate impurities/dirt and improves the life of the carbon filter.

    Stage 2nd
    Pre-RO Carbon Filter: Removes chlorine and organic impurities like harmful pesticides. It also absorbs bad taste odour causing organic compounds from water.

    Stage 3rd
    Mini Filter: Filters water further to ensure removal of finer particulate impurities.

    Stage 4th
    RO Membrane: Removes dissolved salts, hardness, pesticides, fluoride and heavy metals like arsenic, lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts.

    Stage 5th
    UV Chamber: Acts as an additional stage of purication to further inactivate bacteria, virus and parasites to deliver safe water.

    Stage 6th
    Post-RO Carbon Filter: Last level of purification acts as a polisher and enhances the taste of purified water.

  • How much time does it take to purify water in Pureit Advanced Pro Mineral RO+UV?

    Pureit can purify water up to 20 liters per hour depending on the device you have purchased. However, the time taken to purify depends on the life of the filters, the input water pressure, TDS and other impurities present in the water.

  • Does Pureit Advanced Pro Mineral RO+UV remove arsenic, fluoride and nitrates?

    Like other ions, the RO technology can also remove arsenic, fluoride and nitrates

  • How will I get new consumables/membranes replaced?

    You need to call the Pureit helpline and order the consumables. The customer care specialist will visit your place and replace the consumable/Germkill Kit at a nominal cost.

  • What is the storage capacity of Pureit Advanced Pro Mineral RO+UV?

    Pureit has Storage Tank capacity of upto 7 litres. The storage tank is fully automatic and well shielded and as and when you take water out of the tank, the purification process starts automatically again and refills the storage tank.

  • What are all the consumables which are to be replaced?

    You need to replace / clean the sediment filter basis water quality and GKK approximately every 1 year from date of installation.

  • Can I drink the first purification cycle of water from the purifier?

    No, recommendation is to throw the first cycle of water that is filled in the storage tank when the new Pureit purifier is installed and also whenever the Germkill Kit are replaced.

  • Can I open and service my purifier?

    It is not recommended to open and service purifier by an individual. Call our Pureit helpline if you face any issue which requires servicing and opening of the purifier.

  • Can I use reject water?

    It is not recommended to use the reject water for any kind of human/pets consumption (drinking or cooking). It may be used for gardening or cleaning floors.

  • What should I do if any part of purifier is broken?

    Please call the Pureit helpline. Our technicians will visit your house and guide you on the repairs required. There will be a nominal visiting charge and you would need to buy the parts required.

  • What should I do if there is leakage from the purifier?

    First switch off the ball valve if you find any leakage from the purifier and turn off the power switch. Check for any visual improper fitment and then call our Pureit helpline number and register a service request.

  • How long the stored water in Pureit Advanced Pro Mineral RO+UV can be used for drinking?

    You can use stored water for 2 days. If it is not used for more than 2 days we advise you to discard that water, refill and then consume.

Book a Home Visitx