Pureit Marvella RO+UV with Fruit & Veg Purifier has a 6-stage purification process which ensures you to get water that is ‘Safer than boiled water’ and also removes excess Total Dissolved Solids (TDS) to make your water tastier. Stage 1st: Pre-Sediment Filter: Removes fine and coarse particulate impurities/dirt and improves the life of the Carbon Filter. Stage 2nd: Pre-RO Carbon Filter: Removes chlorine and organic impurities like harmful pesticides. It also absorbs bad taste, odour-causing organic compounds from water. Stage 3rd: Mini Filter: Filters water further to ensure removal of finer particulate impurities. Stage 4th: RO Membrane: Removes dissolved salts, hardness, pesticides, fluoride and heavy metals like arsenic, lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts. Stage 5th: Micro Filtration Membrane UV: Micro Filtration Membrane UV is added Post-RO, which ensures that the water is purified not once but twice. Stage 6th: Post-RO Carbon Filter: Last level of purification acts as a polisher and enhances the taste of purified water.
Pureit has Storage Tank capacity of upto 8 litres**. The storage tank is fully automatic and well shielded and as and when you take water out of the tank, the purification process starts automatically again and refills the Storage Tank.
Pureit can purify water up to 10-12 litres per hour depending on the device you have purchased. However, the time taken to purify depends on the life of the filters, the input water pressure, TDS and other impurities present in the water.
Like other ions, the RO technology can also remove arsenic, fluoride and nitrates.
You need to call the Pureit Helpline and order the consumables. The customer care specialist will visit your place and replace the consumable/Germkill Kit at a nominal cost.
Please check the LEDs and see whether SF or GKK needs to be replaced as per the instructions in ‘Advance Alert System’ section. If not then contact the Pureit Helpline for assistance.
You need to replace the Sediment Filter, Pre and Post RO Carbon Filters, RO Membranes, Micro Filtrations Membrane’, Mini Filter, TDS Modulator, Silica gel and Silica Tube when the GKK starts blinking Red. These parts can be bought together by ordering GKK.
No, recommendation is to throw the first cycle of water that is filled in the Storage Tank when the new Pureit purifier is installed and also whenever the Germkill Kit are replaced.
In case there is no purified water in the Storage Tank then you need to first check whether the LED display shows Red or Blue in GKK and check availability of input water. Also, please check if the sediment filter was changed in the due time. If none of the above 2 cases are true, please call Pureit Helpline.
If there is no inlet water/not at home then please switch OFF the device.
It is not recommended to open and service purifier by an individual. Call our Pureit Helpline if you face any issue which requires servicing and opening of the purifier.
It is not recommended to use the reject water for any kind of human/pets consumption (drinking or cooking). It may be used for gardening or cleaning floors.
Please call the Pureit Helpline. Our technicians will visit your house and guide you on the repairs required. There will be a nominal visiting charge and you would need to buy the parts required.
First switch off the Ball Valve if you find any leakage from the purifier and turn off the power switch. Check for any visual improper fitment and then call our Pureit Helpline number and register a service request.
You can use stored water for 2 days. If it is not used for more than 2 days we advise you to discard that water, refill and then consume.