Enter your location pin-code
About the Device
Advanced 6-Stage Purification
Special Mineral Cartridge
100% RO Purification
Storage Capacity
High Speed Purification
Advance voltage fluctuation guard
Attractive, Space Saving Design
United states enviroment protection agency (USEPA) compliant
100% Food grade plastic
Specifications
Dimension
435x297x195
Product weight
9.5 kg
Purified Water Flow Rate
20 Litres/hour
6-Stage Purifying Technology
Advanced 6 Stage Purification with RO+UV technology
Membrane type
Thin-film composite spiral wound
Pump type
Diaphragm pump, 24V dc
% Recovery
Up to 25%
TDS Reduction
Up to 2000mg/lit
Power rating
55 W
Pressure rating
10-30 PSI
Rated voltage
100-240 Va.c. 50/60 Hz (100-300 Va.c. 50/60 Hz)
Material of construction for plastic parts
Food grade Plastic
Length of power cord
1.5 metres
Total dissolved solids
Up to 2000 mg/lit
Total Hardness
500 mg/lit (max.)
Iron
0.3 mg/lit (max.)
Turbidity
1 NTU (max.)
MRP of 1 unit (incl. of all taxes).
*Under test condition, Input TDS – 750 ppm, Turbidity – < 1 NTU, Input Pressure – 10 psi, Input Hardness – 300 ppm, Temp. – room temp.
*^When compared with annual maintenance contracts of branded ROs. Applicable for a family consuming 6000 litres in 1 year.
#Based on unit shipment sales for 2016; excludes pitchers and faucet mount system sales.
The analysis includes in-home point-of-use water treatment systems only.
^Basis the device purchased, it will either have UV Chamber or Micro Filtration (MF) membrane.
**Assumption: 5 member family needing 20 litres of water every day (4 litres per person per day).
***For all water contact parts.
Warranty
1 Year
Product Manual
Download
FAQs
How does Pureit Classic G2 + Mineral RO + UV purify water?
Pureit Classic G2 + Mineral RO + UV has a 6 stage purification system which ensures you get the best water that is safe and sweet. In the primary 3 stages, the water passes through the Pre-Sediment Filter, Pre-RO Carbon Filter and Mesh Filter which removes coarse particulate impurities, dirt, chlorine, pesticides and other organic impurities. After which, the water flows through RO Membrane at high pressure where it removes TDS and other heavy metals. The fifth stage is the UV Chamber that inactivates bacteria and viruses. The final and sixth stage is the Post RO Carbon Filter which improves the taste of the water.
What is the storage capacity of Pureit Classic G2 + Mineral RO + UV?
The storage capacity of Pureit water purifiers differs as per the device’s specifications. Pureit Classic G2 + Mineral RO + UV has a storage tank capacity of approximately up to 6 litres under running water. The storage tank is well-shielded and the process of filling the storage tank is fully automatic. When you take water out of the tank the purification process automatically refills the storage tank.
How much time does it take to purify water in Pureit Classic G2 + Mineral RO + UV?
Pureit Classic G2 + Mineral RO + UV can purify water up to 20 litres per hour. However, the time taken to purify is influenced by the type of your water supply, the longevity of the device’s filters, the input water pressure, and other impurities present in the water.
What are the benefits of drinking RO purified water?
Pureit Classic G2 + Mineral RO + UV water purifier provides mineral-rich drinking water that is free of chemicals, heavy metals, pesticides, and other dangerous contaminants. RO membranes only protect your family from waterborne infections as they reduce the TDS level and turn the hard water up to 2000 PPM into soft water. Thus, the water is sweetened, allowing you to drink it more regularly.
What kinds of impurities does Pureit Classic G2 + Mineral RO + UV remove?
In Pureit Classic G2 + Mineral RO + UV, water travels through a semipermeable membrane constructed of a thin layer composite that blocks dangerous pollutants such as lead, mercury, silt, and other impurities, leaving only clean, filtered drinking water behind. These RO filters also reduce the TDS levels and remove chlorine to improve the taste and odour of the water, whereas the UV chamber kills the bacteria and viruses to provide clean drinking water.
How do I know when to change my Germ Kill Kit (Filters)?
Pureit Classic G2 + Mineral RO + UV is equipped with an Advance Alert system which is a digital system that automatically alerts (2 short beeps every 15 minutes) before the life of a Germ Kill Kit so that you know when it is time to change your filters. In case you do not replace it, then the ‘Auto Shut Off’ feature stops the supply of water automatically. This technology offers you and your family 100% assurance of safety for your drinking water.
How to service or maintain my Germ Kill Kit (Filters)?
You need to replace the sediment filter (4-6) months based on the water quality and the GKK filters approximately every 1 year from the date of installation based on your consumption. Look for the filter alerts. It is not recommended to change the Germ Kill Kit (Filters) on your own. You need to call the Pureit helpline at 1800-570-1000 and order a Germ Kill Kit ™. A technician will visit your place to replace it, at a nominal cost.
Should I switch off my Pureit Classic G2 + Mineral RO + UV at night?
No, your water purifier does not need to be turned off at night. Pureit Classic G2 + Mineral RO + UV is also designed with Power Saving Mode that goes on standby once the tank is full, thus, saving power.