Pureit Classic 23 Litres

This normally happens because of temperature differences. It does not affect the working of your Pureit and you will continue to receive water that is ‘Safer Than Boiled Water’.

If some part of Pureit breaks accidentally, please call Pureit helpline. We will arrange to send you a replacement part. You
will however have to pay for the replacement part.

You will need to clean the Activated Carbon Trap™. Please refer the ‘Cleaning & maintenance of Pureit' section for this

In some cases, as with colloidal clay suspensions and with soluble salts of calcium, magnesium, iron etc., the turbidity and colour may not be completely removed. In these cases please ensure that there are no deposits or scales in the transparent chamber – if these are there then clean them by using a disinfectant. Rinse the Transparent Chamber thoroughly with Pureit water. Once this is done, the output water will be microbiologically ‘Safer Than Boiled Water’ even if some colour persists.

Dissolved chemicals in water can occassionally precipitate out of the water, and deposit inside Pureit. This however does
not in any way affect the Germkill capability of Pureit. To avoid scaling, rinse the Top Chamber & Transparent Chamber
once in a while/If scaling happens in the Top Chamber orTransparent Chamber, you should gently remove it with water
(descaling). Do not use any abrasive cleaners or tools. Refer to Cleaning & maintenance of Pureit section for details.

Input water may contain many materials which affect the taste of water. Of these, Pureit removes materials like oil,
sand, soil, clay, dirt, decayed animal and plant waste, and harmful pesticide impurities and is therefore likely to improve
the taste of water. However, Pureit does not remove some dissolved salts that may contribute to taste like sodium
chloride salt, calcium and magnesium. In fact, Pureit retains some ‘good’ dissolved salts present in drinking water. This may
affect the taste of water.

Yes, the water will be free of harmful germs, but there may not always be an improvement in taste. However by pouring
brackish/sea water into the Pureit, there may be a risk of choking the system, and the ‘Auto Shut-Off™’ mechanism may
mal function.

The first batch of water that gets purified in your new Pureit, or from a new Germkill Kit™, should be drained away when
it collects in the Transparent Chamber. This batch of water may contain some black particles that have got loosened from
inside the Polisher TM during transit. Black particles may also appear as a result of shifting or tilting Pureit or when you are
using Pureit after several days. It should be noted that these black particles are a part of the Polisher™’s specially designed
porous filter derived from natural coconut shell and are therefore completely safe, even if accidentally swallowed. To remove these black particles pour the collected water back into the top chamber and rinse the Transparent Chamber with Pureit water to remove any particles that may be stuck to the sides.

No, this is not a problem.You will continue to get absolutely safe, odour free, great tasting water from the Transparent Chamber.

This happens when the Germkill Life Indicator™ turns fully red. You need to change the Germkill Kit™ immediately as Pureit’s Auto Shut-Off™ mechanism doesn’t allow unsafe water to pass to the Transparent Chamber.

It depends on the quality of water that is put into  Pureit. Typically 9 liters of water gets purified between 1-5 hrs.
Cleaning the Activated carbon Trap™ regularly can also improve the flow rate.