Enter your location pin-code
About the Device
About the Device
Presenting Pureit Classic Nxt RO+MF, an advanced multi-stage water purifier that gives 100% safe drinking water with lowest maintenance cost.Advanced 6-Stage Purification
Advanced 6-Stage Purification
Water passes through Advanced 6 Stages of RO+MF Purification so that you get 100% safe & sweet tasting water without any harmful bacteria, viruses, heavy metals & chemicals.100% RO Purification
100% RO Purification
All water passes through RO ensuring complete purification & no mixing of purified & impure water.Storage Capacity
Storage Capacity
Comes with a good capacity water tank with up to 7 litres storage, so you always have instant access to safe and sweet water throughout the day even during power failures.Smartsense Indicators
Smartsense Indicators
Advance Alert warns you 15 days before filter expiry and Auto Shut Off stops water if filter is not changed. 100% guarantee of safe and sweet water.Advance voltage fluctuation guard
Advance voltage fluctuation guard
Protects your purifier from sudden voltage fluctuation as high as 280 volts & also works in as low as 100 VAC.Power Saver Mode
Power Saver Mode
This mode automatically switches off the power supply to the water purifier once the water tank is full. This prevents wastage of energy, thereby helping you save on your monthly bills.Attractive, Space Saving Design
Attractive, Space Saving Design
Compact and sleek design that fits in any kitchen.United states enviroment protection agency (USEPA) compliant
United states enviroment protection agency (USEPA) compliant
Meets stringent international criteria for microbiologically safe drinking water by removing 1 crore virus & 10 crore bacteria from 1litre water.100% Food grade plastic
100% Food grade plastic
Prevents harmful toxins from leaching into water.Specifications
Dimension
366 mm (H) x 300 mm (W) x 222 mm (D)
Product weight
7KG
Purified Water Flow Rate
Up To 10-12 Litres/hour
6-Stage Purifying Technology
Advanced 6 Stage Purification with RO+MF technology
Membrane type
Thin-film composite spiral wound
Pump type
Diaphragm pump, 24V dc
% Recovery
Up to 25%
TDS Reduction
90% (min.)
Power rating
36 W
Pressure rating
10-30 PSI
Rated voltage
100-240 Va.c. 50/60 Hz (100-300 Va.c. 50/60 Hz)
Material of construction for plastic parts
Food safe, non-toxic plastics
Length of power cord
1.5 meters
Total dissolved solids
Up to 2000 mg/lit
Total Hardness
500 mg/lit (max.)
Iron
0.3 mg/lit (max.)
Turbidity
1 NTU (max.)
1 6.8 to 7.1 under running water conditions.
^ Best-in-class water storage among the class of branded Reverse Osmosis based in-home water purification devices under MRP. (incl of all taxes) of `10,000 only. (7 Litres under running water conditions).
# Applicable for all water contact parts.
2 Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure and life of Filter elements.
3 Input water quality and TDS content are important determinants of output water quality.
4 If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost. If the pressure is less than 10 PSI then you need to buy ‘Pressure enhancing pump’ at an additional cost. Device should not be installed in a house where input pressure is greater than 60 PSI. Post-RO Carbon Filter fitted in the device may need to be changed intermittently at extra cost in case you face smell issues. Technical specifications are subject to change or improvement without prior notice.
5 In case the TDS is >1000 PPM, a company provided anti-scalant is recommended to be installed This has to be purchased at extra cost.
6 This is based on standard consumption of 10 litres per day, with an input TDS of 750 PPM, 25° water and 18 PSI pressure. Depending on the variation from above you may need to change the GKK / parts even before the stipulated time
Warranty
1 Year
Product Manual
Download
FAQs
How does Pureit Classic Nxt RO + MF purify water?
Pureit Classic Nxt RO + MF has a 6 stage purification system which ensures you get the best water that is safe and sweet. In the primary 3 stages, the water passes through the Pre-Sediment Filter, Pre-RO Carbon Filter and Mesh Filter which removes coarse particulate impurities, dirt, chlorine, pesticides and other organic impurities. After which, the water flows through RO Membrane at high pressure where it removes TDS and other heavy metals. The fifth stage is the high-intensity UV Chamber that inactivates bacteria and viruses. The final and sixth stage is the Post RO Carbon Filter which improves the taste of the water.
What is the storage capacity of Pureit Classic Nxt RO + MF?
The storage capacity of Pureit water purifiers differs as per the device’s specifications. Pureit Classic Nxt RO + MF has a storage tank capacity of approximately up to 7 litres under running water. The storage tank is well-shielded and the process of filling the storage tank is fully automatic. When you take water out of the tank the purification process automatically refills the storage tank.
How much time does it take to purify water in Pureit Classic Nxt RO + MF?
Pureit Classic Nxt RO + MF can purify water 10-12 litres per hour. However, the time taken to purify is influenced by the type of your water supply, the longevity of the device’s filters, the input water pressure, and other impurities present in the water.
What are the benefits of drinking RO purified water?
Pureit RO water purifiers provide mineral-rich drinking water that is free of chemicals, heavy metals, pesticides, and other dangerous contaminants. RO membranes can protect your family from waterborne infections as they reduce the TDS level and turn the hard water up to 2000 PPM into soft water. Thus, the water is sweetened, allowing you to drink it more regularly.
What kinds of impurities does Pureit Classic Nxt RO + MF remove?
Water passes through RO membrane pores made of a thin layer composite in the Pureit Classic Nxt RO + MF, which prevents harmful contaminants like lead, mercury, silt, and other impurities, leaving only clean, filtered drinking water behind. To improve the taste and aroma of the water, these RO filters reduce TDS levels and remove chlorine, while the MF membrane filters the water not once but twice to ensure safe drinking water.
How do I know when to change my Germ Kill Kit (Filters)?
Pureit Classic Nxt RO + MF is equipped with an Advance alert system which is a digital system that automatically alerts (2 short beeps every 15 minutes) before the life of a Germ Kill Kit so that you know when it is time to change your filters. In case you do not replace it, then the ‘Auto Shut Off’ feature stops the supply of water automatically. This technology offers you and your family 100% assurance of safety for your drinking water.
How to service or maintain my Germ Kill Kit (Filters)?
You need to replace the sediment filter (4-6) months based on the water quality and the GKK filters approximately every 1 year from the date of installation based on your consumption. Look for the filter alerts. It is not recommended to change the Germ Kill Kit (Filters) on your own. You need to call the Pureit helpline at 1800-570-1000 and order a Germ Kill Kit ™. A technician will visit your place to replace it, at a nominal cost.
Should I switch off my Pureit Classic Nxt RO + MF at night?
No, your water purifier does not need to be turned off at night. Pureit Classic Nxt RO + MF is also designed with Power Saving Mode that goes on standby once the tank is full, thus, saving power.
Products you may also like
Compare
Out of Stock
₹10,990.00₹14699.00(You save ₹3709.00)
Save ₹3709.00
Advanced 6 stage purification with RO+UVDouble Purity lockPower saving mode
Compare
Out of Stock
₹14,490.00₹17649.00(You save ₹3159.00)
Save ₹3159.00
Advanced 6 stage purification with RO+UVSpecial mineral cartridgeLowest maintenance cost
Compare
Out of Stock
18%
off
off
₹8,990.00₹11050.00(You save ₹2060.00)
Save ₹2060.00
Lowest maintenance costBest in class UV lampDouble Purity lock
