Enter your location pin-code
About the Device
Copper Charge Technology™
Advanced 7-Stage Purification
Dual water dispensing
Precise Copper Dosing
Intelligent Copper Auto-Cleaning
Large Storage Capacity
Smartsense Indicators
United states enviroment protection agency (USEPA) compliant
100% Food grade plastic
Specifications
Dimension
447x350x361
Product weight
9.5KG
Purified Water Flow Rate
28 Litres/hour
7-Stage Purifying Technology
Advanced 7 Stage Purification with RO+UV+MF technology
Membrane type
Thin-film composite spiral wound
Pump type
Diaphragm pump, 24V dc
% Recovery
Up to 45%
TDS Reduction
Up to 2000mg/lit
Power rating
60 W
Pressure rating
10-30 PSI
Rated voltage
100-240 Va.c. 50/60 Hz (100-300 Va.c. 50/60 Hz)
Material of construction for plastic parts
Food grade Plastic
Length of power cord
1.5 metres
Total dissolved solids
Up to 2000 mg/lit>
Total Hardness
500 mg/lit (max.)
Iron
0.3 mg/lit (max.)
Turbidity
1 NTU (max.)
~ Copper Charge Technology is a unique proprietary technology, which is based on electrochemical dissolution of copper in water.
#Smart Technology which ensures precise dosing in every glass of water. Consumption of 2 litres of copper charged RO water every day will meet up approximately 30% of the RDA for copper (for adults, as guided by the Indian Council of Medical Research, ICMR).
**Advance Alert System will alert you 15 days before end of every 180 days (approximately) or 15 hours before completion of every 200 hours of pump running time, whichever is earlier. The purifier will communicate the alert only if the purifier is in a switched on condition during the scheduled alert time. Post the completion of the scheduled alert time, Auto Shut off™ of water will be activated automatically only for GKK, even if the purifier is in a switched off condition.
^Applicable for all water contact parts.
*Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure and life of Filter elements.
***Input water quality and TDS content are important determinants of output water quality.
** If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost. If the pressure is lesser than 10 PSI then you need to buy ‘Pressure enhancing pump’ at an additional cost. Device should not be installed in a house where input pressure is greater than 60 psi.
>In case the TDS is >1000 PPM, a company provided anti-scalant is recommended to be installed. This has to be purchased at extra cost.
>>If the iron content in the input water is more, it is recommended to install a company provided iron filter at an additional cost.
*Consumption of 2 litres of copper charged RO water every day, will add up to approximately 30% of the RDA for copper (for adults, as guided by the Indian Council of Medical Research, ICMR). ***Applicable for consumers who have deficiency of copper
*Safety from harmful viruses and bacteria as per stringent guidelines led by USEPA, when purifier is used and maintained as recommended in product user manual.
Warranty
1 Year
Product Manual
Download
FAQs
How does Pureit Copper+ RO work?
Pureit Copper+ RO is an innovative water purifier that combines contemporary technology with copper goodness to improve the health of your family. Its 7-stage RO+UV+MF purification process cleans water by allowing it to pass through different stages such as - Pre-sediment, Pre-carbon, and Mesh Filters to remove impurities and dirt, a RO Membrane to remove excess total dissolved salts (TDS), hardness, and heavy metals, a UV chamber to inactivate bacteria or viruses, a Post RO Carbon Filter to improve taste, and finally, a Micro-filtration Membrane to ensure that the water is purified not once but thrice along with copper charge technology!
How does drinking copper water benefit my health?
Drinking copper water is known to improve digestion, boost immunity, fight obesity and boost overall health. Consumption of 2 litres of copper charged RO water every day, will add up to approximately 30% of the RDA for copper( for adults, as guided by the Indian Council of Medical Research, ICMR)
How is a Copper RO water purifier better than a normal RO water purifier?
A copper RO water purifier has a number of advantages over a standard RO water purifier. Copper Charge Technology, a one-of-a-kind method that operates by electrochemically releasing copper in water, is used in Pureit Copper RO purifiers. In addition, this purifier gives you the option of dispensing RO water or Copper charged RO water with 99.8% pure copper in real-time. So there's no need to wait until the next day to obtain your daily dosage of copper-enriched water.
What is the storage capacity of Pureit Copper+ RO?
The storage capacity of Pureit water purifiers differs as per the device’s specifications. Pureit Copper+ RO has a storage tank capacity of upto 8 Litres under running water. The process of filling the storage tank is fully automatic. When you take water out of the tank the purification process automatically refills the storage tank.
How much time does it take to purify water in Pureit Copper+ RO?
Pureit Copper+ RO can purify water up to 24 litres per hour. However, the time taken to purify is influenced by the type of your water supply, the longevity of the device’s filters, the input water pressure, and other impurities present in the water.
What kinds of impurities does Pureit Copper+ RO remove?
Pureit Copper+ RO is the best water purifier you can purchase for getting 100% cleaned water, thanks to its unique 7-stage filtration mechanism. Its RO membranes are 0.0005 microns in size, effectively blocking any extra total dissolved solids (TDS), arsenic, fluoride, or nitrates from passing through, removing all heavy metal and chemical contaminants from the water. The UV light in the chamber kills germs and viruses, leaving you with purified water that is also copper-enriched.
How do I clean the copper vessel in my Pureit Copper+ RO?
Pureit Copper+ RO is equipped with Intelligent Copper Cleaning Mode that smartly senses and schedules copper auto-cleaning by also providing fresh copper infusion at all times unlike a copper vessel, which requires laborious regular cleaning to keep it from oxidation. Its Precise Copper Dosing feature also infuses the right amount of copper in every glass of water.
How do I know when to change my Germ Kill Kit (Filters)?
Pureit Copper+ RO is equipped with ‘Smartsense’ filter indicators which is a digital advance system that will warn you 15 days before the Germ Kill Kit expiry so that you know when it is time to change your filters. In case you do not replace it within 15 days, the ‘Double Purity Lock’ feature automatically stops the supply of water to offer you and your family 100% assurance of cleanliness and safety for your drinking water.
Should I switch off my Pureit Copper+ RO purifier at night?
No, your water purifier does not need to be turned off at night. It is important to note that if the tank is full, you can dispense around 8 litres of water even without electricity. However, Copper RO water can be dispensed only with electricity as the copper is infused in real-time.
How to change or maintain my Germ Kill Kit (Filters)?
Pureit Copper+ RO has an indicator panel with SF/GKK indicator that will blink to prompt you to call the Pureit helpline at 1860-210-1000 to get the respective GKK changed or replaced. It is not recommended to change the Germ Kill Kit (Filters) on your own. A technician will visit your place to replace it, at a nominal cost.