Enter your location pin-code
About the Device
Digital Purity Indicator
Advanced 7-Stage Purification
Special Mineral Cartridge
100% RO Purification
Smartsense Indicators
High Speed Purification
Large Storage Capacity
United states enviroment protection agency (USEPA) compliant
100% Food grade plastic
Specifications
Dimension
485x360x311
Product weight
9.5
Purified Water Flow Rate
28 Litres/hour
7-Stage Purifying Technology
Advanced 7 Stage Purification with RO+UV+MF technology
Membrane type
Thin-film composite spiral wound
Pump type
Diaphragm pump, 24V dc
% Recovery
Up to 45%
TDS Reduction
Up to 2000mg/lit
Power rating
60 W
Pressure rating
10-30 PSI
Rated voltage
100-240 Va.c. 50/60 Hz (100-300 Va.c. 50/60 Hz)
Material of construction for plastic parts
Food grade Plastic
Length of power cord
1.5 metres
Total dissolved solids
Upto 2000 mg/lit##
Total Hardness
500 mg/lit (max.)
Iron
0.3 mg/lit (max.)####
Turbidity
1 NTU (max.)
~ Depends on your water quality.
~~ You can see the quality of water through the Purity Indicator only when water is being purified or the purifier is in use.
^ Pure refers to TDS range of water.
^^ 10 litres of storage only with running water. Or else 9.2 litres of water dispensing.
** Under test condition, Input TDS – 750 ppm, Turbidity –
Warranty
1 Year
Product Manual
Download
FAQs
How does Pureit Ultima Mineral RO + UV + MF?
Pureit Ultima Mineral RO + UV + MF has a 7 stage purification system which ensures you get the best water that is safe and sweet. In the primary stages, the water passes through the Pre-Sediment Filter, Pre-RO Carbon Filter and Mesh Filter which removes coarse particulate impurities, dirt, chlorine, pesticides and other organic impurities. After which, the water flows through RO Membrane at high pressure where it removes TDS and heavy metals. The fifth stage is the high-intensity UV Chamber that inactivates bacteria and viruses. After UV Chamber, the water passes through a TDS Modulator that adds adequate minerals to the water, which then flows through a Post RO Carbon Filter that improves the taste and finally, the Micro-Filtration Membrane where water is purified three times!
What is the storage capacity of Pureit Ultima Mineral RO + UV + MF?
The storage capacity of Pureit water purifiers differs as per the device’s specifications. Pureit Ultima Mineral RO + UV + MF has a storage tank capacity of approximately 10 Litres under running water. The process of filling the storage tank is fully automatic. When you take water out of the tank the purification process automatically refills the storage tank.
How much time does it take to purify water in Pureit Ultima Mineral RO + UV + MF?
Pureit Ultima Mineral RO + UV + MF can purify water up to 28 litres per hour. However, the time taken to purify is influenced by the type of your water supply, the longevity of the device’s filters, the input water pressure, and other impurities present in the water. Pureit Ultima Mineral RO + UV + MF is also equipped with High-Water Saving feature that offers significant water saving of upto 45% compared to ordinary ROs that save only 25%.
What kinds of impurities does Pureit Ultima Mineral Ro + UV + MF remove?
Pureit Ultima Mineral RO + UV + MF is equipped with Digital Purity Indicator that senses water quality upto 5000 times a second to show how pure your water is. The RO Membranes are only 0.0005 microns thick, thereby it does not allow any excess total dissolved solids (TDS), arsenic, fluoride, or nitrates from passing through, and eventually remove all heavy metals, dirt and chemicals from the water. The UV Chamber eliminates germs, viruses and other pathogens through its UV rays and its Micro-filtration memebrane purifies water three times.
What are the benefits of drinking water from RO + UV + MF purifiers?
RO Membranes not just reduce total dissolved solids (TDS) but also do not allow any heavy metals to pass through, converting hard water into soft water fit enough for consumption. Whereas, UV light deactivates the viruses and bacteria present in the water and MF helps in purifying the same water thrice. Thus, the RO stage, UV stage, Micro-Filtration Membrane and (MF) stages are all used to purify water, guaranteeing that you consume pure, tasty and healthy water good for your hair, skin and body.
How do I know when to change my Germ Kill Kit (Filters)?
Pureit Ultima Mineral RO + UV + MF facilitates an Advance Alert System that warns you (the LED indicator will start blinking red alert) 15 days before the life of a Germ Kill Kit so that you know when it is time to change your filters. In case you do not replace it within 15 days, then the ‘Auto Shut Off’ feature stops the supply of water automatically. This technology offers you and your family 100% assurance of safety for your drinking water.
How to change or maintain my Germ Kill Kit (Filters)?
It is not recommended to change the Germ Kill Kit (Filters) on your own. You need to call the Pureit helpline at 1860-210-1000 and order a Germ Kill Kit . A technician will visit your place to replace it, at a nominal cost.
Should I switch off my Pureit Ultima Mineral RO + UV + MF at night?
No, your water purifier does not need to be turned off at night. Water purification systems are designed to run continuously.