India's 1st UV Duo Shield
India's 1st UV Duo Shield
Pureit's latest purifier Titan UV+ that comes with India's 1st UV Duo shield (UV Lamp + UFSC+ UV Led).Ultra Fine Silver Activated Carbon (UFSC)
Ultra Fine Silver Activated Carbon (UFSC)
Charged with Ultra Fine Silver Activated Carbon that acts as a polisher and enhances the taste of purified waterDual UV Protection
Dual UV Protection
Kills up to 99.99% bacteria & Viruses with best-in-class UV Lamp + In-Tank UV LedLarge storage capacity
Large storage capacity
High storage capacity of 7 litres so that you & your family never run out of fresh & safe water.Retains Essential Minerals
Retains Essential Minerals
Get water enriched with essential minerals like Calcium & Magnesium.Integrated sediment filter
Integrated sediment filter
Removes visible dirt and impurities with high performing filter life that last longer.6 stages of purification
6 stages of purification
To ensure you get 100% safe drinking water with multistage protection.High speed purification
High speed purification
Best in class purification that gives you up to 40 litres of safe water in less than 1 hour.Smart sense indicators
Smart sense indicators
Alerts you 15 days before filter expiry & suspends water if the filter is not changed to give you safe water.1-Year Warranty
1-Year Warranty
Covers electrical parts from manufacturing defects.Specifications
Dimension
Product weight
Purified Water Flow Rate
6-Stage Purifying Technology
Membrane type
Pump type
% Recovery
TDS Reduction
Power rating
Pressure rating
Rated voltage
Material of construction for plastic parts
Length of power cord
Total dissolved solids
Total Hardness
Iron
Turbidity
1. 7 to 7.5 liters under running water conditions.
2. Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure and life of Filter elements.
3. Input water quality and TDS content are important determinants of output water quality.
4. If input pressure exceeds 30 psi, please install a company provided pressure reducing valve at an additional cost.
If the pressure is less than 5 psi then you need to buy ‘Pressure enhancing pump’ at an additional cost.
Device should not be installed in a house where input pressure is greater than 60 psi.
5. Combined mineral + post carbon cartridge at excessive liters/6 months if you want to continue to get the enriched water.
Warranty
Product Manual
FAQs
Pureit Titan UV+ Advance Alert System™ warns you 15 days* in advance before your consumable expires, so that you can get it replaced before the GKK lifeexpires and purifier stops working. Please refer to the LED indicator panel instructions for details.
No. The UV lamp is designed to last typically for 10,000 working hours. You need to change only the GKK after typically 6000** litres of water has been purified
It is not recommended for the users to change the GKK by themselves. Please call Pureit Helpline when you need to replace the GKK.
No, it is recommended to throw the first 5~10 litres of water when the new Pureit Titan UV+ purifier is installed, and also whenever the GKK is replaced. It will only take 3-5 minutes.
It is not recommended to open and service purifier by an individual. Call Pureit helpline if you face any issue which requires servicing and opening of the purifier.
Please call the Pureit helpline number. Our technicians will visit your house and guide you on the repairs required. There will be a nominal visiting charge and you would need to buy the parts required.
Technicians will suggest you to purchase a booster pump, so that pressure of input water will be appropriate for functioning of the purifier.
Technicians will suggest you to purchase a pressure regulating value, so that water pressure inside device will be regulated according to safety rating of device.
Pureit Titan UV+ has a 6-stage purification process which ensures you to get water that is 'As Safe As Boiled Water'.
Stage 1st: i-Sediment Filter:
Removes fine and coarse particulate impurities/dirt and improves the life of the Carbon Filter.
Stage 2nd: Activated Carbon Filter:
Removes chlorine and organic impurities like harmful pesticides. It also absorbs bad taste and odour causing organic compounds from water.
Stage 3rd: l-Sediment Filter+:
Filters water further to ensure removal of finer particulate impurities.
Stage 4th: High Intensity UV Chamber:
High intensity UV rays ensure maximum UV intensity for inactivation of bacteria, virus and parasites to deliver safe water always.
Stage 5th: Ultra fine silver carbon (UFSC):
This level of purification acts as a polisher and enhances the taste of purified water.
Stage 6th: UV–LED in Tank*:
Acts as an additional stage of purification to further inactivate 99.99% virus to deliver safe water.
Products you may also like
